Category Archives: PyCom

Pycon WiPy boot script

I use the following python script to connect automatically to my wireless network, set the time and configure the FTP service on my device. Advertisements

Posted in PyCom | Tagged | Leave a comment

Uploading files to a WiPy device using FTP

I used the following commands to connect to my Pycon WiPy 2.0 development board and up load a new ‘’ script to the flash folder.

Posted in PyCom | Tagged | Leave a comment

Manually configuring the network on my WiPy

When I received my Pycon WiPy 2.0 board the first thing I did was to work out how to connect it to my network, normally you would do this automatically in the ‘’ script but before you an update this … Continue reading

Posted in PyCom | Tagged | Leave a comment

Upgrading the firmware on a PySense

Having received my new ‘pysense’ expansion board I quickly discovered that I needed to update the firmware.

Posted in PyCom | Leave a comment

Rainbows on a WiPy 2.0

Having got my WiPy connected to my Wireless network I wrote the following script mainly as a way of testing the process of updating (which is the python script that is executed automatically when the4 WiPy 2.0 finishes booting), … Continue reading

Posted in Hardware, PyCom | Tagged , | Leave a comment